Product

Steel A307 Hot Dip Galvanized Carriage Bolt & Nut with Washer

ASTM A307The ASTM A307 specification covers carbon steel bolts and studs ranging from 1/4″ through 4″ diameter. This is your everyday, run of the mill bolt specification often manufactured using

Previous：Gr4.8 Blue Zinc-Plated Round Head Coach Bolt Next：DIN Standard Stainless steel Mushroom Head Square Neck Bolts

ASTM A307

The ASTM A307 specification covers carbon steel bolts and studs ranging from 1/4″ through 4″ diameter. This is your everyday, run of

the mill bolt specification often manufactured using A36 round bar. There are three grades A, B, and C* which denote tensile strength,

configuration, and application. Refer to the Mechanical Properties Chart for the subtle strength differences within each grade.

A307 Grades

A		Headed bolts, threaded rods and bent bolts intended for general applications.
B		Heavy hex bolts and studs intended for flanged joints in piping systems with cast iron flanges.
C*		Nonheaded anchor bolts, either bent or straight, intended for structural anchorage purposes. The end of a grade C anchor bolt intended to project from the concrete will be painted green for identification purposes. Permanent marking is a supplemental requirement. *As of August 2007, grade C has been replaced by specification F1554 grade 36. We will continue to supply grade C, if required by the project.

A307 Mechanical Properties

Grade	Tensile, ksi	Yield, min, ksi	Elong %, min
A	60 min	--	18
B	60 - 100	--	18
C*	58 - 80	36	23

A307 Chemical Properties

Element	Grade A	Grade B
Carbon, max	0.29%	0.29%
Manganese, max	1.20%	1.20%
Phosphorus, max	0.04%	0.04%
Sulfur, max	0.15%	0.05%

A307 Recommended Hardware

Nuts			Washers
A307 Grades A & C*		A307 Grade B
1/4 - 1-1/2	1-5/8 - 4	1/4 - 4
A563A Hex	A563A Heavy Hex	A563A Heavy Hex	F844